Tween loft bed – Converting a double bed into an attic is really a matter of extending the positions of the bed frame and seeing the resulting structure is stable enough to keep the sleeping resident. These instructions are to put a wooden frame with the actual foot positions, but the tank can be adapted to other types of bed. Build frames between the ceiling beds. Place a position on an edge of a strip and screw it with a screw in each corner and two evenly distributed over the edge. Place another position in parallel with the first post, with enough space to fit a double bed in your bed position. This should leave about 4 centimeters of the strip located outside the edge of your mail.
Then build the frame tween loft bed. Enable when you have created the first post. Fill another strip opposite the original tape and screw it on both posts with a total of eight wooden screws. Build a total of four final pieces. Connect two end pieces with a 2 with 4 beams. Place the bar in the nuts formed by strips. Set the beam so that it flies with the ends of both end pieces. Attach another bar to the other end of the end pieces using the same steps. And then collect another frame.
Build a tween loft bed, move all the best components to the new tween loft bed. This is much easier than moving the finished bed. Lay the night room on the side and slide the end bars across the ends of the bedside locations. Screw the bed chairs into place with two wooden screws by mail. Drill through the shelves on the inside of the end frame. Add another plank that runs parallel to the first, 24 inches from the floor. Attach it as you did first, with a total of eight screws.