Wooden Loft Bed Full Size Plan

Classic Wooden Loft Bed Full Size View in gallery

Wooden loft bed full size – Ceiling beds in combination with workstations are useful wherever occupancy is limited, such as college dorms and studio apartments. A pre-purchased device can cost hundreds of dollars, but you can build your own for a fraction of that cost. All the material you need is at your local hardware store. Many stores will cut timber for you, you only need to merge the pieces. Fit a box of 2 by 12-inch discs, two of them 40 inches long and the other two 79 inches. The shorter boards should be snapped up between the longer ones. Squeeze the box together with bar clamps. Drill four 1/16 inch pilot project holes in each corner jointly, and secure the box together with 3-inch wood screws through the pilot holes.

Wooden loft bed full size, squeeze two 75-inch pieces of 2 by 2-inch board along the inside of the long boards, 4 inches up from the ground. These will provide support for the boards that hold the mattress. Screw 2 by 2-inch discs into the 2 by 12-inch discs with 2 1/2 inch wood screw, drill hole drilling every 3 inches to prevent the wood from cracking. Place 15 40-inch 2 by 4-inch pieces onboard the box, resting on the support you have screwed into place. Space them evenly.

Related  Metal Maxtrix Loft Bed

Drill two guide holes through the outer wall of the box and into the end of each 2 by 4-inch board. Screw the boards into place with 3-inch wooden screws. Turn wooden loft bed full size frame upside down. Stand a 65-inch 4 by 4-inch insert in each corner of the bed frame, and clamp them in place. Drill six pilot holes per corner, with three on one side of the corner and three on the other. Screw the bed frame to the posts with 4-inch wooden screws. Turn on the loft bed up and stand on your legs. Tighten a 76-inch 2 of 4-inch aboard the rear legs, placed 4 inches above the ground. Drill hole and screw it into place with three 3-inch wooden screws per side.